Garage doors are really convenient and very valuable addition to your home. Although, installing a garage door is only half the battle. Much more effort and attention go into the timely maintenance of garage doors. And when we say maintenance, garage doors have a range of parts and accessories to take care of. Amongst them, garage door springs are an important item. There are the primary garage door springs as well as garage door extension springs and garage door side springs.
Replacing Garage Door Side Springs: Things To Remember
When it comes to replacing something like garage door side springs, it can be said that the best way to go is to hire a professional garage door repair for the job. But if you cannot do that for any constraints, then you will have to manage by yourself. This is when our DIY guide will be useful for you. Although, before you start the procedure, you need to make some preparations and remember a few things.
These considerations and points will make sure that there are no accidents; the entire garage door spring replacement is done safely, efficiently and seamlessly. So before we go into the steps, let us first look at the things you will need to replace garage door springs.
- Replacement garage door extension springs. You can get these from a reputed manufacturer or can even source it from online stores.
- A ladder of 6′ or 8′ height.
- A step stool.
- A pair of C-clamps
- Duct tapes
- A socket wrench
- Wrenches of appropriate size. If you do not have the right size, go for a crescent wrench.
Along with that, you will have to ensure that you are using the right replacement springs. You can check the suggested replacement parts as well as what can work from the owner’s manual of the garage door. If not possible, the height and weight of the door can help you find the right alternatives.
How To Replace Garage Door Side Springs: A 4-Step Tutorial
There are a variety of ways to replace garage door side springs. Although, if you are new at this, then you must follow this tutorial. It is the easiest, most effective and safest way through when you need to replace garage door springs by yourself.
Step 1: Using a 6′ or 8′ ladder, you must open the garage door. This can be done by pulling on the rope that hangs near the opener. It will disengage the door from the opener. Use C-clamps in each track of the garage door near the top, and keep them as tight as possible when removing the door.
Step 2: This is the part where you remove the broken springs. Follow these steps:
- Know where the extension spring is located.
- Make sure the pulley bolt is loose.
- Untie the safety cable.
- Then remove the broken spring.
Step 3: Install the new springs. For this:
- Attach the new springs.
- Tie the safety cable back.
- Fasten the pulley bolt tightly.
Step 4: This part involves adjustment and inspection. Check that the pulley cable is tightly fastened and not hanging down and also check for any other damages or faults in the door.
All that being said, if you want the best garage door side spring replacement, Las Vegas Best Garage Door Repair is the number one name for the job. They offer a variety of garage door repair, spring replacement and associated services at affordable prices.